Contact UsHome PageMotor StampingsE & I LaminationsTransformer CoilsInfrastructure
 
 

The Laminations are manufactured in various sizes for Transformers, Energy Meters, Flouescent Chokes in high speed Pneumatic presses with capacity 40 Ton and 100 Ton with De-Coiler, & Straightener
Laminations are manufacured from Electrical Steel Sheet CRNO,CRGO and semi processed materials.
Laminations Type T-3, T-15, T-43 are avilable with air gap on centre limb, CVT (Constant Voltage Transformer) Type in any required size, Three phase Laminations can be manufacutred on request
'U' & 'T' Laminations are available for application of open type chokes.
Type 33 F & 15 F Laminations are also available.
All Other Tools are compound tools.

 

With the high speed Pneumatic press any components in large quantities can be manufactured in CRCA, Stainless Steel, Brass, Aluminium Coils etc.,
THE VARIOUS LAMINATION SIZES ARE
Type No. Normal Dimensions in (mm) Rivet No. Holes Dia.(mm)
A B C D E F G
17   1.27     3.81   3.18     0.64   0.64     1.91   0.64 - -
12A   1.59    4.76   3.97   0.79   0.79   2.38   0.79 - -
23 19.10 57.20 47.60 9.50 9.50 28.60 9.50 - -
30 20.00 60.00 50.00 10.00 10.00 30.00 10.00 4 3.97
31   2.22   6.67   5.56   1.11   1.11   3.33   1.11 - -
15   2.54   7.62   6.35   1.27   1.27   3.81   1.27 4 0.556
3   3.18   9.53   7.94   1.59   1.59   4.76   1.59 4 0.635
43   5.08   15.24   12.70   2.54   2.54   7.62   2.54 4 0.675
8   5.08   18.45   17.15   2.54   2.54   12.07   4.13 4 0.952
8B   7.62   23.50     19.69     3.81     3.81   12.07     4.13   4 1.100
Home | Motor Stampings | E & I Laminations | Transformer Coils | Infrastructure | Contact Us
© 2002 Nagachandra Plasto Metals Pvt. Ltd. All Rights Reserved
 
Site optimized for 800 x 600 Resolution and for Internet Explorer 4.0 and above